Impact Mechanical Power Presses    
 Sitemap   Contact Us
  World Class Power Presses Manufacturer Home Infrastructure Enquiry Form  
Gap Frame Front to Back Shaft Presses
PUX Series
(Single Point)
(10-315 Tons)

P2X Series
(Two Point)
(100-315 Tons)

H Frame Presses
IXP-Front to Back Shaft H Frame Presses
(63-315 Tons)
PSU – Double Sided Left to Right Shaft Single Point Crank Presses (100-800 Tons)
PDU – Double Sided Two Point Crank Presses
(63-500 Tons)
P1E – Double Sided Single Point Eccentric Geared Presses (100-1000 Tons)
P2E- Double Sided Two Point Eccentric Geared Presses (200-630 Tons)
P4E – Double Sided Four Point Eccentric Geared Presses (200-800 Tons)
High Speed Presses
PDH Double Sided Two Point High Speed Presses (32-315 Tons)
PSH Double Sided Single Point High Speed Presses (16-32 Tons)
Notching Presses
PNC High Speed Motor Lamination Notching Presses (4-25 Tons)
Inclined / Inclinable Presses
GGI/GGP – Left to Right Shaft Gap Frame Permanently Inclined & Inclinable Presses (100-250 Tons)
PKC Double Sided Knuckle Joint Presses
(100-1000 Tons)
PSE Double Sided Crank High Energy Cold Extrusion Presses (100-315 Tons)
PFF- Friction Screw Presses (100-630 Tons)
Stack Turn Over Device

It can turn 180 degree the stack of R/L blanks produced simultaneously by blanking press line and can change the feed direction. Both R/L direction turning type and front/rear direction turning type are available by Impact Machines.

Stack Length 500~4000 800~4000 mm
Stack Width 350~2600 400~2000 mm
Stack Weight (without pallets) 5000  Max. 5000 Max.  Kg
Stack Height (without pallets) 100~600 510    mm
Pallet Height (Maximum) 200 130 mm
Clear Opening 1100  700 mm
Stack Clamping Stroke  700 Max. 450 Max. mm
Maximum Clamping Force 90 90 kN
Stack Clamping Speed   45 (Approx.) 45 (Approx.) mm/sec.
Stack Unclamping Speed 65 (Approx.) 65 (Approx.) mm/sec.
Stack Reversing Speed  23~25 20 (Approx.) sec/180 Deg.
Reversing Angle 180 180 Degree
Drum Drive Motor 7.5 3.7 kW
Hydraulic Power Pack Motor 7.5 7.5 kW
Stack Loading Height from Floor to Table Top (Front Side) 1615 (Approx.) 1450 (Approx.) mm
Stack Unloading Height above Floor (Rear Side) 1915 (Approx.) 2000 (Approx.) mm
Total Weight (Approx.) 22000 19000 Kg
Home   |   Infrastructure   |   Enquiry Form   |   Sitemap   |   Contact us  
Copyright 2009 Impact Machines, India Site by SMARTech